Well at least the parts related ones.
See them all here: https://repair.wiki/w/How_To_Fix_an_iPhone_15_Pro_That_Randomly_Restarts
The most surprising here is... the prox flex no longer causes 3 min restarts, like it did on the 13 and 14 series.
Also. I haven't tested with top board only yet... But i'm sure that there's something on the bottom board that needs to be connected, so it doesn't restart.
Once that is confirmed, I'll update the repair wiki.
And I have a base model iPhone 15 I will also be doing more research on, to see what parts on that model cause 3 min restarts
Drop a 🔥 in the comments below if you find these repair wiki guides helpful 🙌
0xa1 - battery
0x300000 - Charging Port Flex
0x400000 - Wireless Charging Flex
0x700000 - Charging Port + Wireless Charging Flex
If you have a Seek Thermal Cam, you're missing out if you don't have a VCC Seek Stand: https://www.vccboardrepairs.com/buy-seek-stand
Injured Gadgets just got these back in stock, so get them while you can!
It can take us a while to build these out sometimes, so they're sometimes out of stock for a while, but we're working towards always having inventory ready to build more as they sell out.
This stand makes using a thermal cam so easy. So much better than any other thermal solution on the market.
It allows you to get real close up (using my Macro Lens), and easily find where the short is coming from.
Plus it's hard free, so you can have your hands free to try to boot the device from DCPS, while having an image that is in focus & not moving around.
You can even record a video through the app, while you inject voltage into the short, so you can go back & see exactly which component was it that was heating up.
Save yourself lots of time by getting a Seek Cam, Stand & Macro Lens! ...
Anyone who is doing game console repairs, knows how many screws you need to remove to access the motherboard.
Especially the PS5, with the 5,000 screws or so.
If you don't already have an electric screwdriver, GET ONE ASAP.
🌟 Cordless Screwdriver with T9 Bit: https://amzn.to/3E5duCj
🌟Extended T9 Bit: https://amzn.to/3c4YJac
It's rechargeable through micro USB and allows you to easily swap the tips out. You can also fold it to be straight or L shape.
Let me know below if you are already using an electric screwdriver 👇👇
I was surprised this one was successful...
Hope you guys enjoy all the detail I provide in the videos!
These cloths are amazing. They're soft but don't melt when you heat them.
They're perfect for reballing ICs. Just fold it in half twice & place the IC on top.
While you're reballing, the chip will sink down a bit & allow you to reball much better than if you were to reball on your workmat
Buy them here:
⭐ Cleanroom Cloth for Reballing ICs: https://amzn.to/4hMLwzn
Let me know what you think!
